Floor Prep - Caltra Building Products

PU360 Moisture Suppressant

Claire McComb — Fri, 19 Sep 2025 11:01:26 +0000

Low-emission polyurethane primer – a one-component fast-drying polyurethane primer designed for priming substrates before the application of polyurethane and hybrid parquet adhesives. It can also be used as a means to isolate residual moisture in substrates. Quick-drying and odourless, this PU360 Moisture Suppressant contains no solvents or water, binds dust and facilitates the application of parquet adhesives. Ideal for priming of absorbent and less absorbent substrates commonly found in construction prior to application of polyurethane (PU) and hybrid parquet adhesives. When applied twice, it provides a moisture barrier on cement and concrete substrates – in cases where residual moisture is up to a maximum of 5% according to the CM method.

• Pre-Mixed Polyurethane Primer
• Single Part
• Up To 95% RH 2 Coat System
• Re-Coat in 30 Minutes

• Suitable For Underfloor Heating
• Low VOC – EC1 Plus
• No Primer Required

Packaging:
11KG

The post PU360 Moisture Suppressant first appeared on Caltra Building Products.

Primer Grip 360

Sun, 26 Sep 2021 15:11:09 +0000

Caltra Primer Grip 360 is a hybrid primer for the ultimate mechanical key. It is a high performance bonding agent specifically designed for tiling and flooring installations. Formulated with advanced polymers and special fine aggregate, it is a universal multi-purpose primer. Caltra Primer Grip 360 is designed to provide an improved mechanical key to all common absorbent and non-absorbent backgrounds including plaster, plasterboard, timber, concrete, epoxy DPM, flooring grade asphalt and glazed tiles. Caltra Primer Grip 360 is rapid drying and can be tiled over or levelled in as little as 15-20 minutes.

• Gritty surface for superior bond
• Ideal for tiling and levelling
• Rapid Drying
• For Porous and Non-Porous substrates

Packaging:
5kg

Coverage:
5-10 sq m per kg

The post Primer Grip 360 first appeared on Caltra Building Products.

NP Keycoat

Sat, 25 Sep 2021 17:36:38 +0000

NP Keycoat is a high performance, water based, modified polymer primer. Supplied ready to use it is formulated for use on smooth and non-porous, demanding substrates prior to tiling or levelling. It is ideal for priming one coat DPMs, tiled floors and metal substrates. NP Keycoat can also be diluted for use on porous substrates as a general purpose primer to reduce the absorption of the substrate before applying tile adhesives and levelling compounds.

The post NP Keycoat first appeared on Caltra Building Products.

DPM Universal

Mon, 20 Sep 2021 16:05:38 +0000

Caltra DPM Universal is a superior 2 pack epoxy surface applied damp proof membrane. Allows immediate installation of moisture sensitive floor finishes onto damp concrete and screed. It is suitable for use as a one or two application depending on the moisture content of the floor.

• 1 or 2 coat application
• Solvent Free, Low Odour
• Red or Yellow for easy identification
• Easy to Apply
• Excellent Adhesion

Packaging:
5kg pack

Coverage:

The post DPM Universal first appeared on Caltra Building Products.

DPM One Coat Rapid

Mon, 20 Sep 2021 16:04:32 +0000

Caltra DPM One Coat Rapid is a superior 2 pack epoxy surface applied damp proof membrane ideal for fast-track applications. Allows immediate installation of moisture sensitive floor finishes onto damp concrete and screed. It is designed for use as a one coat application depending on the moisture content of the floor and allows same day covering.

• Single coat application
• Walkable in 4 hours
• Fast track applications
• Up to 98%RH in one coat

The post DPM One Coat Rapid first appeared on Caltra Building Products.

Acrylic Primer

Thu, 09 Sep 2021 16:36:15 +0000

Acrylic Primer is a ready to use primer for use on porous and difficult substrates prior to tiling or screeding, or to seal gypsum plasters or screeds prior to the addition of cement based adhesives.

It can be used neat when sealing substrates or diluted with an equal quantity of water for general priming.

• Water-based polymer emulsion
• Ready to use primer
• Improved adhesion
• Coloured to indicate application

Packaging:
1L and 5L

Coverage:
When used neat: 1 Litre will cover approx. 7 – 10 m2
When diluted 1:1 with clean water: 1 Litre will cover approx. 14 – 20 m2

The post Acrylic Primer first appeared on Caltra Building Products.