It is ideal for fixing bolts, anchors, machine beds, stanchions, etc. or for repairing large cracks or voids. Multigrout EP is suitable for use in both dry and damp conditions and in areas subject to static and vibrating loads.

• 70MPa
• Epoxy Pourable
• 25N/MM2 in 8 Hours
• Non-Shrink
• Good Chemical Resistance

Packaging:
5kg (yield 2.5L)
Includes Part A, B & C

The post Multigrout EP first appeared on Caltra Building Products.

It is designed to provide a structural infill where grouting in inappropriate but can also be used to plug joints as an insitu shuttering prior to grouting being carried out.

• High early and ultimate strengths
• >65n/mm2 in 28days
• Pumpable
• Easy to use
• Chloride free

Packaging:
25kg bags

Coverage:
Approx. 13.4 L per 25kg bag

The post Thixotropic Pumpable Mortar first appeared on Caltra Building Products.

It is designed for use primarily as a packing and bedding mortar between precast concrete units to provide a smooth flush finish. SBM can also be used in other applications where a high strength fill, structural support or dry pack mortar is required.

• HIGH EARLY AND ULTIMATE STRENGTH
• >50 N/MM2 IN 28DAYS
• EASY TO USE
• CHLORIDE FREE

Packaging:
25kg bags

Coverage:
Approx. 12.4 L per 25kg bag

The post Structural Bedding Mortar first appeared on Caltra Building Products.

Designed for heavy load carrying applications in solid stone or concrete and medium load applications in hollow bricks. Ideal for the anchoring of fixings, rebar, threaded collars etc, repair or bonding of concrete and chemical fixing of numerous wooden, metal or concrete applications.

• ETAG001
• STYRENE FREE
• HIGH LOAD
• NON SAG
• FAST SET
• SETS IN 10MIN
• LOAD FROM 1HR
• 60MPa

Packaging:
300ml 2part cartridge

Coverage:

The post Rapid Anchor EA first appeared on Caltra Building Products.

Skim Coat is also ideal for filling pinholes, sand runs and other minor surface blemishes in precast concrete units or for finishing of deeper repairs. It is intended to be applied with a scrape coat application up to 3 mm depth.

• FAST SET
• LOW SHRINK
• EXTRA FINE FINISH
• EASY TO USE
• CHLORIDE FREE

Packaging:
20kg bags

Coverage:
14.7L / 20kg bag

The post Precast Skim Coat first appeared on Caltra Building Products.

• FAST SET
• LOW SHRINK
• SMOOTH FINISH
• EASY TO USE
• CHLORIDE FREE

Packaging:
25kg bags

Coverage:
14.7L / 25kg bag

The post Precast Patch Repair first appeared on Caltra Building Products.

Multigrout requires only the addition of water to produce a highly fluid grout. It is mainly used for placing under machinery base plates, crane rails, bridge bearing pads, transformers, handrails and many other similar applications.

• High Early Strength
• >60 N/mm2 in 28days
• Non-Shrink
• No Bleed
• High Flow
• Chloride Free

Packaging:
25kg multiwall paper sacks

Coverage:
25kg bag will make approx. 14l of flowable grout

The post Multigrout 60 first appeared on Caltra Building Products.

It is designed to penetrate the capillary structure of the substrate, and by binding loose particles together, forms a tough, resilient enamel. This leaves the surface dust-free, hardwearing and resistant to oils, alkalis and other chemicals. Acrylic Concrete Sealer can be applied to damp (not wet) surfaces and allows the substrate to ‘breathe’. Acrylic Concrete Sealer also functions as a curing membrane when applied to fresh concrete surfaces.

• Colourless
• Improves wear resistance
• Eliminates surface dusting
• Reduces dirt penetration
• Improves oil and chemical resistance
• Easier floor maintenance

Packaging:
5L and 25L Metal Containers

Coverage:
1L will cover 5-10 m2 (depending on porosity and texture of substrate)

The post Acrylic Concrete Sealer first appeared on Caltra Building Products.