Streetscape ECO - Caltra Building Products https://larsenbuildingproducts.com Manufacturer of quality building products since 1975 Wed, 10 Sep 2025 11:03:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 /images/edited/47.jpg Streetscape ECO - Caltra Building Products https://larsenbuildingproducts.com 32 32 Tarmac Restorer ../../../product/tarmac-restorer/?utm_source=rss&utm_medium=rss&utm_campaign=tarmac-restorer Thu, 04 Jul 2024 12:14:51 +0000 ../../../?post_type=product&p=5218 Caltra Tarmac Restorer is a unique combination of acrylic polymers, inorganic pigments and fillers designed to enhance the appearance of tarmac drives. It leaves an attractive, low sheen finish, which is resistant to weather damage and staining. High performance coating Makes old tarmac look like...

The post Tarmac Restorer first appeared on Caltra Building Products.

]]> Caltra Tarmac Restorer is a unique combination of acrylic polymers, inorganic pigments and fillers designed to enhance the appearance of tarmac drives. It leaves an attractive, low sheen finish, which is resistant to weather damage and staining.

  • High performance coating
  • Makes old tarmac look like new
  • Tough, durable seal
  • Quick drying: use driveway after 4-5 hours

 

Packaging:

5 litre container

 

 

The post Tarmac Restorer first appeared on Caltra Building Products.

]]> Fusion XT Brick Slip Bond ../../../product/fusion-xt-brick-slip-bond/?utm_source=rss&utm_medium=rss&utm_campaign=fusion-xt-brick-slip-bond Fri, 07 Jun 2024 13:50:14 +0000 ../../../?post_type=product&p=5071 Caltra FusionXT Brick Slip Bond is a specially formulated, flexible, non-slip, standard-setting adhesive. It is designed for the installation of brick slips and natural stone to a range of substrates including brick and blockwork, plastered walls and sand & cement render. With Fiberflex™ Reinforced properties,...

The post Fusion XT Brick Slip Bond first appeared on Caltra Building Products.

]]> Caltra FusionXT Brick Slip Bond is a specially formulated, flexible, non-slip, standard-setting adhesive.

It is designed for the installation of brick slips and natural stone to a range of substrates including brick and blockwork, plastered walls and sand & cement render.

With Fiberflex™ Reinforced properties, this product is ideal for walls and floors, both internally and externally.

  • 3-20mm bed depth
  • 5 hour pot life
  • 18 hour set time
  • Internal & External
  • Fiberflex Reinforced
  • Walls & Floors
  • Just add water

 

Packaging:

17kg Bucket

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the full range now!

The post Fusion XT Brick Slip Bond first appeared on Caltra Building Products.

]]> Fusion XT Flow-Joint Smooth ../../../product/fusion-xt-flow-joint-smooth/?utm_source=rss&utm_medium=rss&utm_campaign=fusion-xt-flow-joint-smooth Fri, 07 Jun 2024 13:40:10 +0000 ../../../?post_type=product&p=5066 Caltra FusionXT Flow-Joint Smooth, not only incorporates Eco Reduced-Carbon properties, but is also rapid-setting at only 15-20 minutes. For joint widths of 3-50mm, this product is ideal for a fast-track finish and can be walked on in 1 hour! Like the other Caltra jointing compounds,...

The post Fusion XT Flow-Joint Smooth first appeared on Caltra Building Products.

]]> Caltra FusionXT Flow-Joint Smooth, not only incorporates Eco Reduced-Carbon properties, but is also rapid-setting at only 15-20 minutes. For joint widths of 3-50mm, this product is ideal for a fast-track finish and can be walked on in 1 hour! Like the other Caltra jointing compounds, the Flow-Joint smooth is available in 3 best-selling colours: Buff, Charcoal and Natural.

Caltra FusionXT Flow-Joint Smooth is a superior rapid setting grout. Ideal for providing a fast track finish, specially formulated to exceed performance characteristics as set out in BS7533 part 101 (code of practice for the structural design of pavements using modular paving units).

Manufactured from a controlled blend of fine aggregate, cement & GGBS, it only requires the addition of water to produce a fully BS 7533 part 101 compliant slurry grout jointing mortar for bound surface construction.

  • 3-50mm joint widths
  • Up to 200mm joint depths
  • Initial set 15-20 minutes
  • Walk on in 1 hour
  • Eco- Reduced Carbon
  • Low Shrinkage
  • Frost Resistant
  • Suitable for most types of paving
  • Available in 3 colours: Buff, Charcoal & Natural

 

Packaging:

17kg Bucket

Coverage:

9.25L per 17kg Bucket

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Flow-Joint Smooth first appeared on Caltra Building Products.

]]> Fusion XT Brush-Joint ../../../product/fusion-xt-brush-joint/?utm_source=rss&utm_medium=rss&utm_campaign=fusion-xt-brush-joint Fri, 07 Jun 2024 13:21:44 +0000 ../../../?post_type=product&p=5063 Caltra Fusion XT Brush-Joint is a ready-to-use, high quality, brush-in jointing compound for all types of paving. Its advanced, permeable formulation is suitable for use all year round. Ideal for use with concrete, natural stone and porcelain paving. Fusion XT Brush-Joint perfect for those wanting...

The post Fusion XT Brush-Joint first appeared on Caltra Building Products.

]]> Caltra Fusion XT Brush-Joint is a ready-to-use, high quality, brush-in jointing compound for all types of paving. Its advanced, permeable formulation is suitable for use all year round.

Ideal for use with concrete, natural stone and porcelain paving.

Fusion XT Brush-Joint perfect for those wanting joint widths of 3-20mm, but needs an extra bit of setting time before being walked on (typically 10-24 hours). This ready-to-use, brush-in jointing compound comes in 3 different colours: Black, Buff and Grey.

  • 3-20mm joint widths
  • Walk on in 10-24 hours
  • Apply in all weather
  • Quick & easy to install
  • Suitable for all paving types
  • Available in 3 colours: Black, Grey & Buff

Packaging:

15kg Bucket

Coverage:

Approx. 15m2 per bucket (based on 600 x 600mm slabs with 20mm deep and 10mm wide joints)

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the full range now!

The post Fusion XT Brush-Joint first appeared on Caltra Building Products.

]]> Fusion XT Fine-Joint ../../../product/fusion-xt-fine-joint/?utm_source=rss&utm_medium=rss&utm_campaign=fusion-xt-fine-joint Fri, 07 Jun 2024 13:09:39 +0000 ../../../?post_type=product&p=5058 Caltra FusionXT Fine-Joint is perfect for joint widths of up to 15mm. Fine-Joint comes in 3 popular colours (Anthracite, Grey and Limestone) and can be walked on in as little as 3-4 hours. Caltra FusionXT Fine-Joint is a specially formulated, flexible, rapid setting tile grout....

The post Fusion XT Fine-Joint first appeared on Caltra Building Products.

]]> Caltra FusionXT Fine-Joint is perfect for joint widths of up to 15mm. Fine-Joint comes in 3 popular colours (Anthracite, Grey and Limestone) and can be walked on in as little as 3-4 hours.

Caltra FusionXT Fine-Joint is a specially formulated, flexible, rapid setting tile grout. This advanced formulation utilises advanced polymers, additives and a proprietary hydraulic binder which is free from Portland Cement, to ensure uniform joint colour, free from efflorescence. Suitable for use as a flexible wall and floor grout. Ideal for providing a smooth, stain, mould and water resistant finish.

  • 1-15mm joint widths
  • Walk on in 3-4 hours
  • Just add water
  • Anti-efflorescent
  • Internal & External use
  • Suitable for all paving types
  • Available in 3 colours: Anthracite, Grey & Limestone

 

Packaging:

10kg Bucket

Coverage:

1kg of Fine-Joint will grout approx. 1.25m2

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Fine-Joint first appeared on Caltra Building Products.

]]> Fusion XT Priming Slurry ../../../product/fusion-xt-priming-slurry/?utm_source=rss&utm_medium=rss&utm_campaign=fusion-xt-priming-slurry Fri, 07 Jun 2024 13:08:38 +0000 ../../../?post_type=product&p=5051 Caltra FusionXT Priming Slurry is a bonding mortar, which is essential for creating a bond between paving and the bedding mortar. Manufactured from a controlled blend of aggregate, cement & GGBS, it only requires the addition of water to produce a fully BS 7533 (code...

The post Fusion XT Priming Slurry first appeared on Caltra Building Products.

]]> Caltra FusionXT Priming Slurry is a bonding mortar, which is essential for creating a bond between paving and the bedding mortar. Manufactured from a controlled blend of aggregate, cement & GGBS, it only requires the addition of water to produce a fully BS 7533 (code of practice for the structural design of pavements using modular paving units) compliant bonding mortar for bound surface construction.

Apply with a brush or roller to the base of the paving units.

Suitable for porcelain, natural stone, precast concrete flags & clay pavers.

Fusion XT Priming Slurry incorporates Eco Reduced-Carbon properties, which means that for every 1 tonne of priming slurry used, this is equivalent to carbon absorbed by growing 1 tree for 10 years or not driving a car for 107 miles.

  • BS 7533 compliant
  • Eco – Reduced Carbon
  • Improves bond
  • Suitable for porcelain, natural stone, precast concrete flags & clay pavers
  • Easy to apply
  • Mixing, just add water

 

Packaging:

17kg Bucket

Coverage:

Approx. 13m2 (depending on thickness of application)

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Priming Slurry first appeared on Caltra Building Products.

]]> Flowable Jointing Mortar FJM Eco Smooth ../../../product/flowable-jointing-mortar-fjm-eco-smooth/?utm_source=rss&utm_medium=rss&utm_campaign=flowable-jointing-mortar-fjm-eco-smooth Tue, 01 Mar 2022 11:16:34 +0000 ../../../?post_type=product&p=3190 Caltra FJM Eco Smooth slurry grout jointing mortar is specifically formulated to exceed performance characteristics as set out in BS 7533 part 101 (Code of practice for the structural design of pavements using modular paving units), clause 5.6, table 12. It is fast and efficient...

The post Flowable Jointing Mortar FJM Eco Smooth first appeared on Caltra Building Products.

]]> Caltra FJM Eco Smooth slurry grout jointing mortar is specifically formulated to exceed performance characteristics as set out in BS 7533 part 101 (Code of practice for the structural design of pavements using modular paving units), clause 5.6, table 12. It is fast and efficient to apply, allowing the contractor to grout large areas of paving quickly.

Eco – Reduced Carbon.

FJM Eco Smooth is the equivalent to carbon absorbed by growing one tree for 10 years or not driving a car for 149 miles per tonne of product used.

Test BS 7533 Caltra FJM ECO
Type 40		 Complies
Compressive ≥40 MPa 49.5 MPa YES
Flexural ≥6 MPa 8.6 MPa YES
Modulus (20 000 ± 4 000) MPa 21 500 MPa YES
Shrinkage ≤0.15% 0.02% YES
Adhesive ≥1.5 MPa ≥2 MPa YES

Colours:
Natural, mid-grey, charcoal & buff.

Packaging:
25kg bags, 48 per pallet.

Calculate how much you will need for your project:
Try our coverage calculator

NBS Source. Your one-stop-shop when it comes to finding, selecting, and specifying construction products for your next project. Add this product into your specification now!

The post Flowable Jointing Mortar FJM Eco Smooth first appeared on Caltra Building Products.

]]> Fine Bedding Concrete FBC Permeable Eco ../../../product/fine-bedding-concrete-fbc-permeable-eco/?utm_source=rss&utm_medium=rss&utm_campaign=fine-bedding-concrete-fbc-permeable-eco Tue, 01 Mar 2022 09:29:52 +0000 ../../../?post_type=product&p=3182 Caltra Streetscape FBC Eco permeable bedding is specifically formulated to exceed performance characteristics as set out in BS 7533 part 101 (Code of practice for the structural design of pavements using modular paving units), clause 5.4, table 9. FBC ECO permeable is ideal for pavements...

The post Fine Bedding Concrete FBC Permeable Eco first appeared on Caltra Building Products.

]]> Caltra Streetscape FBC Eco permeable bedding is specifically formulated to exceed performance characteristics as set out in BS 7533 part 101 (Code of practice for the structural design of pavements using modular paving units), clause 5.4, table 9. FBC ECO permeable is ideal for pavements constructed with clay, concrete or natural stone paving units.
Eco – Reduced Carbon.
FBC Eco Permeable is the equivalent to carbon absorbed by growing two trees for 10 years or not driving a car for 313 miles per tonne of product used.

 

Test BS 7533 Type 35 Caltra FBC ECO Permeable Complies
Compressive ≥35 MPa 42.5 MPa YES
Flexural ≥4.5 MPa 6.5 MPa YES
Modulus (18 000 ± 3 500) MPa 16,009 MPa YES
Shrinkage ≤0.09% 0.03% YES
Permeability ≥5 x 10-5 ≥5 x 10-5 YES

 

Packaging:
25kg bag
48 per pallet

1.2t Weatherproof bulk bags:
Dry powder delivered in 1.2t weatherproof bulk bags on pallets for larger projects where 25kg bags are not practical.

Calculate how much you will need for your project:
Try our coverage calculator

 

NBS Source. Your one-stop-shop when it comes to finding, selecting, and specifying construction products for your next project. Add this product into your specification now!

The post Fine Bedding Concrete FBC Permeable Eco first appeared on Caltra Building Products.

]]> Water Repel ../../../product/water-repel/?utm_source=rss&utm_medium=rss&utm_campaign=water-repel Sun, 26 Sep 2021 18:00:10 +0000 ../../../?post_type=product&p=1191 Water Repel is a ready-to-use, solvent-based, masonry water-repellent. It is ideal for use on standard building materials like brickwork, concrete and wood, and will also help to prevent water damage to stonework, leather, canvas, etc. Water Repel penetrates readily into most porous surfaces to form...

The post Water Repel first appeared on Caltra Building Products.

]]> Water Repel is a ready-to-use, solvent-based, masonry water-repellent.

It is ideal for use on standard building materials like brickwork, concrete and wood, and will also help to prevent water damage to stonework, leather, canvas, etc. Water Repel penetrates readily into most porous surfaces to form a clear, hydrophobic layer in the substrate’s pore structure, thus preventing the ingress of moisture.

• Clear waterproofer & protector
• Vapour-permeable
• Ideal for brick, wood and concrete

Packaging:
5L and 25L Metal Containers

Coverage:
Dependent on nature of substrate. Approx. 3 – 8 m2 / L

The post Water Repel first appeared on Caltra Building Products.

]]> Streetscape protector ../../../product/streetscape-protector/?utm_source=rss&utm_medium=rss&utm_campaign=streetscape-protector Sun, 26 Sep 2021 17:35:05 +0000 ../../../?post_type=product&p=1172 Caltra Streetscape Protect is an advanced, water based, impregnating surface protector and stain repellent for all types of natural stone. Impregnator or penetrating sealers are designed to penetrate below the surface of the stone and either deposit solid particles in the pores of the stone...

The post Streetscape protector first appeared on Caltra Building Products.

]]>

Caltra Streetscape Protect is an advanced, water based, impregnating surface protector and stain repellent for all types of natural stone.

Impregnator or penetrating sealers are designed to penetrate below the surface of the stone and either deposit solid particles in the pores of the stone or coat the individual minerals below the surface. Penetrating sealers work by restricting water, oil and dirt from entering the stone. Properly applied, a good impregnator sealer will not affect the texture or the appearance of the stone.

Packaging:
25L drums, 32 per pallet

Coverage:
25L – 125m2 Approximately depending on application method.

NBS Source. Your one-stop-shop when it comes to finding, selecting, and specifying construction products for your next project. Add this product into your specification now!

The post Streetscape protector first appeared on Caltra Building Products.

]]>