It is designed for the installation of brick slips and natural stone to a range of substrates including brick and blockwork, plastered walls and sand & cement render.

With Fiberflex Reinforced properties, this product is ideal for walls and floors, both internally and externally.

• 3-20mm bed depth
• 5 hour pot life
• 18 hour set time
• Internal & External
• Fiberflex Reinforced
• Walls & Floors
• Just add water

Packaging:

17kg Bucket

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the full range now!

The post Fusion XT Brick Slip Bond first appeared on Caltra Building Products.

Caltra FusionXT Flow-Joint Smooth is a superior rapid setting grout. Ideal for providing a fast track finish, specially formulated to exceed performance characteristics as set out in BS7533 part 101 (code of practice for the structural design of pavements using modular paving units).

Manufactured from a controlled blend of fine aggregate, cement & GGBS, it only requires the addition of water to produce a fully BS 7533 part 101 compliant slurry grout jointing mortar for bound surface construction.

• 3-50mm joint widths
• Up to 200mm joint depths
• Initial set 15-20 minutes
• Walk on in 1 hour
• Eco- Reduced Carbon
• Low Shrinkage
• Frost Resistant
• Suitable for most types of paving
• Available in 3 colours: Buff, Charcoal & Natural

Packaging:

17kg Bucket

Coverage:

9.25L per 17kg Bucket

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Flow-Joint Smooth first appeared on Caltra Building Products.

Ideal for use with concrete, natural stone and porcelain paving.

Fusion XT Brush-Joint perfect for those wanting joint widths of 3-20mm, but needs an extra bit of setting time before being walked on (typically 10-24 hours). This ready-to-use, brush-in jointing compound comes in 3 different colours: Black, Buff and Grey.

• 3-20mm joint widths
• Walk on in 10-24 hours
• Apply in all weather
• Quick & easy to install
• Suitable for all paving types
• Available in 3 colours: Black, Grey & Buff

Packaging:

15kg Bucket

Coverage:

Approx. 15m2 per bucket (based on 600 x 600mm slabs with 20mm deep and 10mm wide joints)

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the full range now!

The post Fusion XT Brush-Joint first appeared on Caltra Building Products.

Caltra FusionXT Fine-Joint is a specially formulated, flexible, rapid setting tile grout. This advanced formulation utilises advanced polymers, additives and a proprietary hydraulic binder which is free from Portland Cement, to ensure uniform joint colour, free from efflorescence. Suitable for use as a flexible wall and floor grout. Ideal for providing a smooth, stain, mould and water resistant finish.

• 1-15mm joint widths
• Walk on in 3-4 hours
• Just add water
• Anti-efflorescent
• Internal & External use
• Suitable for all paving types
• Available in 3 colours: Anthracite, Grey & Limestone

Packaging:

10kg Bucket

Coverage:

1kg of Fine-Joint will grout approx. 1.25m2

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Fine-Joint first appeared on Caltra Building Products.

Apply with a brush or roller to the base of the paving units.

Suitable for porcelain, natural stone, precast concrete flags & clay pavers.

Fusion XT Priming Slurry incorporates Eco Reduced-Carbon properties, which means that for every 1 tonne of priming slurry used, this is equivalent to carbon absorbed by growing 1 tree for 10 years or not driving a car for 107 miles.

• BS 7533 compliant
• Eco – Reduced Carbon
• Improves bond
• Suitable for porcelain, natural stone, precast concrete flags & clay pavers
• Easy to apply
• Mixing, just add water

Packaging:

17kg Bucket

Coverage:

Approx. 13m2 (depending on thickness of application)

As a complete external paving and tiling solution, our FusionXT range comprises five high-quality, high-performance products including three jointing compounds: Fine-Joint, Brush-Joint, and Flow-Joint Smooth, as well as Priming Slurry Bonding Mortar and Brick-Slip Bond Stone & Cladding Adhesive. Explore the complete FusionXT range now!

The post Fusion XT Priming Slurry first appeared on Caltra Building Products.